BBS 336

bbs 336.jpg

The BSS Audio FDS-336T Minidrive Loudspeaker Management System 2x6 covers all four core functions of the Omnidrive range: crossovers (Linkwitz-Riley, Bessel or Butterworth), mid-band limiters, equalisation freely assignable to inputs and outputs, and both input and output delay.

However, by leaving out the more advanced features in the Omnidrive, BSS has achieved dramatically lower prices, ensuring that Minidrive is suitable for a range of applications for which an Omnidrive would simply not have been affordable.


    • Input Section
    • Input Impedance: 10kOhm, electronically balanced
    • Maximum Input Level: +20dBu
    • CMRR: Better than 50dB (30Hz-20kHz)
    • Input Connector: XLR-3F or equivalent
    • Pin 1 Floating (no connection)
    • Pin 2 Signal +ve (Hot)
    • Pin 3 Signal -ve (Cold)
    • Output Section
    • Output Impedance: <50 Ohms, electronically balanced & floating
    • Maximum Output Level: +20dBu into 600 Ohms or greater
    • Output Gain: +/-21dB, variable in 0.2dB steps
    • Output Connector: XLR-3M or equivalent
    • Pin 1 Ground
    • Pin 2 Signal +ve (Hot)
    • Pin 3 Signal -ve (Cold)
    • Transformer balancing optional
    • Crossover Filters
    • Slopes: 6, 12, 18, 24, or 48dB per octave (Filter type dependant)
    • Type: Bessel, Butterworth, Linkwitz-Riley or WHISEWORKS — NTM
    • Delays: Available on Inputs A and B, and Outputs 1-4 (FDS-334T) / Outputs 1-6 (FDS-336)
    • Delay Step: 20 microseconds minimum
    • Max Delay Time: 628ms on inputs, 635 ms on outputs
    • EQ
    • Maximum number of EQ filters: 37 (depending on crossover slopes)
    • EQ Type: Parametric, Bell or shelving on any filter
    • EQ Gain: +/-15dB, variable in 0.2dB steps
    • EQ freq: 15Hz-20kHz
    • General Performance (filters out)
    • Freq. Response:
    • 10Hz - 20kHz, +/-0.25dB
    • Dynamic range: >108dB, unweighted 22Hz to 22kHz
    • Channel Separation: >80dB, unweighted 20Hz - 20kHz
    • Distortion (THD): <0.01%, 20Hz - 20 kHz @ +10dBu input level
    • Input metering: 'SIG' present, -3dB, 0dB, +3dB, +6dB, +12dB, Clip Relative to clip point (+20dBu)
    • Output Metering: SIG (-40dB), -20dB, -12dB, -6dB, -3dB, LIMIT, Over (+6dB) Relative to limiter threshold setting
    • Dimensions: 1.75" x 19" x 8" (44.4mm x 483mm x 203mm)
    • Weight: 6.2lbs (2.8kg), unpacked
    • AC Power: 90V-264V AC, 50/60Hz, 30VA
Дополнительную информацию можно получить, позвонив нам

тел./моб: (067) 518-05-99

тел./факс: (048) 714-55-77